| Hose Size | Spec Number | Coupling bowl size | Weight per 50 ft | Coil Diameter per 50 ft | Minimum Kink Burst Test Pressure |
| 3/4" | 2207 | 3/4" GHT | 5.5 lbs | 8" | 500 PSIG |
| (19 mm) | | (19 mm) | (2.5 kg) | (20 cm) | (3500 kPa) |
| ● The hose shall be of single jacket construction with 100% virgin filament polyester. |
| ● There shall be a minimum of 10.0 filler yarns per inch in the jacket. |
| ● The thickness of the lining shall be 0.015" (381 µm) minimum and it shall be |
| constructed of extruded T.P.U. elastomer. |
| ● If required (optional), the outside jacket shall be treated with yellow ENCAP elastomer, |
| which shall completely encapsulate the jacket fibers and not merely surface coat the |
| jacket. |
| ● The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C). |
| ● FM abrasion test of 1,000 cycles minimum. |
| ● At 500 PSIG (3500 kPa), its elongation shall not exceed 8% of the initial hose length, |
| it shall not warp more than 20 inches (51 cm) and should not rise from the test table. |
| ● The hose shall not twist more than 10 turns per 100 ft (30,5 m) while at 500 PSIG |
| (3500 kPa). |
| ● Minimum service test pressure of 250 PSIG (1750 kPa). |
| ● Minimum proof test pressure of 500 PSIG (3500 kPa). |
| ● Minimum straight burst test pressure of 750 PSIG (5200 kPa). |
| ● The hose while curved to a radius of 27" (69 cm) shall not burst at less than 750 PSIG |
| (5200 kPa). |
| ● Meets or exceeds UL-19 and NFPA 1961 specifications. |
Let me introduce you to a commercial and light Industrial grade garden hose. A garden hose that will meet all your need. A very tough forestry hose, with a service temperature range of -60°F to 140°F (-51°C to 60°C). Rated for pressures up to 500 P S I. It comes in 3/4 diameter and any length up to 100 feet with garden hose connectors. Lightweight, compact and easy to manipulate. This hose will handle your task with ease.
